Legrand - Wiremold Wiremold Floor Cord Management Kit

Legrand – Wiremold Wiremold Floor Cord Management Kit, Corduct, Cord Protector

Where To Buy?

Find out the relevant products below and buy Legrand – Wiremold Wiremold Floor Cord Management Equipment, Corduct, Cord Protector.

Alternative Product Link:

Click on Here in case you do not discover Legrand – Wiremold Wiremold Floor Cord Management Equipment, Corduct, Cord Protector within the above list.

Main Benefits:

Here are a few main benefits of Legrand – Wiremold Wiremold Floor Cord Management Equipment, Corduct, Cord Protector.

  • Make sure that this fitsby coming into your mannequin quantity.
  • FLOOR CORD COVER: Excellent wire concealer for flooring and counter tops fabricated from rubber to hides cords, ethernet cables, energy cables and wires
  • It conceals cabling and cords whereas making a clean, journey-free floor
  • Strain delicate faucet included with this product.
  • EASY INSTALLATION: Merely minimize to your required size utilizing scissors or utility knife. The self-adhesive backing makes it straightforward to put in on any floor

Better Alternative:

We found these products are better various or associated to Legrand – Wiremold Wiremold Floor Cord Management Equipment, Corduct, Cord Protector.

0/5 (0 Reviews)

Last update on 2020-11-26 / Affiliate links / Images from Amazon Product Advertising API

More Info:

Here are some more information on Legrand – Wiremold Wiremold Floor Cord Management Equipment, Corduct, Cord Protector.
Colour:Ivory  |  Dimension:5 ToesProduct DescriptionWiremold Corduct Cord Protector conceals wires and cords whereas making a clean, journey-free floor. Applies to any flooring floor with strain-delicate tape (included with product). Arrange and conceal cords and cables simply. Product Particulars: Colour: Ivory. Size: 5 Toes (60 Inches) Card opening Dimension: 2 1/2″ L x 7/16″ H x 1/2″ W Electrical Product Kind: Raceway Cord Cowl Materials: Rubber Software Location: Over flooring SIMPLE AND EASY 4 STEPS INSTALLATION: Step1: Lower strip to the specified size. Step2: Insert the wire Step3: Use tweezers to peel one aspect of the tape and apply to backside of corduct. Step4: Peel reverse of the faucet and repair the corduct on the ground. WHAT IS IN THE BOX: 1 X 5 Toes CDI-5 Wiremold Corduct Overfloor Cord Protector 1 X Double Sided Faucet.From the ManufacturerIvory wire protectors for flooring wire protecting in foot visitors space

Frequently Asked Questions:

Here are a few frequently asked questions and answers on Legrand – Wiremold Wiremold Floor Cord Management Equipment, Corduct, Cord Protector.

Question Question 1

Description Calls The Product Ivory (White) As It Seems In The Image, However Prospects Are Sayings Its A Variation Of Brown Or Beige, Which Is It?

It’s positively not ivory.actually beige. we made the vendor conscious of our disappointment within the deceptive description.

Question Question 2

Will A Roomba Navigate Over This With out Getting Hung Up?

our roomba has no downside going over it

Question Question 3

What Is The Dimension Of The Center Channel? We Are Attempting To Determine Out If It Will Maintain A Heavy Gauge Energy Cord.?

we match a 16ga energy cable with an ethernet cable, and whereas comfortable we’re proud of the match. This labored as a result of the channel is wider than it’s deep. we’d think about upping to a 14ga electrical could be okay however would not suggest 12ga. The field states that it’s going to accommodate a 14/3 wire.

Question Question 4

Whats Is The Size Of The Protector?

15′ (15 toes) 4.572 meters

Question Question 5

How Straightforward Is It To Take away The Adhesive To Transfer Product?

Very easy because it s simply double stick tape.It’s possible you’ll want a brand new piece of tape and also you get the identical size of tape because the size of wiremold you ordered

Question Question 6

We Have A Curve In The Wall, Can This Be Molded To The Curve?

A really small quantity of flexibility – would say “no.”

Question Question 7

Does This Come In A Totally different Width? We Have This 5-Half Part Cable That Is Over An Inch Extensive.?


Question Question 8

Is This Cord Cowl Giant Sufficient To Cowl A Surge Protector Cord?

we consider that it could be. It’s 2 1/1 inches large and roughly 1/2 inch in peak. Beneath there’s a slit down the middle so you may put the wire up into the quilt. This enables the wire protector to set flat on the ground. Hope that is useful for you.

Question Question 9

Do You Have This Accessible In Blue?


Question Question 10

Is This Okay For Outside?

we’d assume so since it’s simply rubber or maybe a plastic. One would wish to use an electrical wire which is rated for out of doors use.

Question Question 11

Can This Cord Protector Be Lower In Half?

Sure.It is fabricated from a thick, pliable rubber.Will be minimize with an exacto knife.

Question Question 12

Has Anybody Ever Had Issues With Rodents Chewing These?

We use these in our house,evidently we do not have rodents in the home.

Question Question 13

Do You Provide This In In The Colour Grey?

sure mine is grey or perhaps taupe.our tile within the workplace is grey marble and it high-quality on it

Question Question 14

Hello Out There,Is This Merchandise Size 5 Ft Or 15 Ft. Very Confused.Thanks?

The outline is deceptive.It is 15′. The 5′ one is Wiremold CDI-5 and is $11. This one ought to say CDI-15 😉

Question Question 15

How Troublesome Is It To Lower This To 3Ft?

With a razor knife on protected floor that protected against the knife it’s going to minimize with a agency strain.

Question Question 16

How Many Ethernet Cables, Can We Match Inside? We Want To Match 4-6 Ethernet Cable.?

With the caveat that now we have used mine 50-foot roll but . . .The inside channel is 1/2 inches sq..Seems to be like it’s going to accommodate 4 patch cables however six might be pushing it.5 may work.

Question Question 17

How Many Wires Can Match In The Opening?

It will rely on measurement of wire. now we have a modem cable/telephone cable in mine however its slender and flat.we expect we may in all probability match a second or third if we had needed tofor some motive.we simply needed to run a wire to hook up with a sport console so a system would not lag by way of wi-fi.

Question Question 18

Our Monitoring Says Delivered, However It Is Nowhere To Be Discovered Even After Hoping That It Would Present Up After Two-Three Days. Any Concept What We Ought to Do?

Name the supply service.Has occurred to me. When you having a monitoring quantity observe it down

Question Question 19

Needed To Double Examine.We See That The Peak Is Listed As Each .5″And 10Mm. Which One Is The Overall Height? Thank You?

Depends on the units of the original measurement and how they rounded off.If the measured a true value of 0.5 exactly, that is the same as 12.7 mm.If the true measured value was 10 mm, that corresponds to 0.39 .This gives you a window to work with.

Question Question 20

How Wide Is It?

2.5″ large

Our Insights:

See our insights (primarily based on our personal expertise after buying and utilizing the product, or primarily based on some research work) on Legrand – Wiremold Wiremold Floor Cord Management Equipment, Corduct, Cord Protector, these could be helpful for better understanding.

We gave this product 5 stars as a result of it’s precisely what we wanted and anticipated primarily based on the critiques of others. As others have said, there are two main complaints about this product so buy this product provided that these minor points and/or cures are acceptable to you. The product is made out of rubber that holds a reminiscence when coiled whereas sizzling in the course of the manufacturing course of, particularly on the core of the coil. That is very simply remedied by performing the next easy steps:1. Take away product from packaging and place your entire coil within the sink with out stretching it out. Put a stopper within the sink such that water will not drain out. 2. Warmth a big inventory pot filled with water till it boils. 3. Utilizing the suitable private protecting gear and taking all vital security precautions to forestall scalding, pour the boiling water over the coil and watch it magically return to its meant form like a large shrinky-dink snake. 4. Permit it to soak within the sizzling water for a few minutes. Then, take away it with some tongs, let it drip dry for a few seconds, and lay it out on the ground. The curl might be utterly disappeared with much less than quarter-hour of effort. The second criticism that most individuals have is that the ink from the product labeling on the underside is transferred to the seen half as a result of it is coiled previous to permitting the ink to utterly dry. It makes it look a bit soiled and scuffed upon cursory look and also you would not understand it was ink except you bought down in your arms and knees and seemed carefully. This look was acceptable to me, however within the curiosity of fixing the issue we did just a little experimentation and decided you can make it look barely better with a end sander and numerous time and endurance. Please observe that our outcomes concluded that this methodology does take away the ink; nevertheless, as an alternative of “appearing” scuffed and soiled it actually turns into scuffed and soiled. Given sufficient time, effort, and sandpaper you can in all probability get it to look pristine however in our opinion it actually is not price that a lot time, effort, and sandpaper.

We couldn’t discover the suitable coloration to match our flooring in any native retailer, so we tried and found this merchandise. It comes curled up in a field which implies it’s a must to situation it to put flat. We laid it out on the ground and put heavy objects on the ends to press it down. After a number of days it was flat. We minimize off the surplus through the use of a razor blade knife in opposition to our metallic sq. so we’d get a clear, straight minimize. It was not too onerous to chop, however muscle energy was wanted. We have now an extension wire and speaker wires working through it, so the within capability for wires was good. It additionally seems to be good on our flooring. This merchandise crammed our wants completely. The center channel is about 1/2 inches large and three/8 inches excessive and is accessible by way of a slit within the backside. There are additionally channels on both aspect of the center, however they don’t have a break up in them to feed a wire (see picture #2). When you use these different channels, we’d counsel threading a small wire (fishing line?) with a small weight. Then connect your wire to the wire and pull it through.

We bought this merchandise to cowl two coaxial cables that run alongside the edge of our mudroom door. Youngsters have been all the time tripping over the cables. We looked for awhile to seek out one of the best product, and we’re glad we select this one. It is a heavy materials, that lies flat even with out utilizing the included adhesive. We have been capable of stuff each coaxial cables into the channel, although it did damage our fingers- we needed to cease and take a break for a bit earlier than ending your entire run of cable. It seems to be nice alongside our flooring, better than seeing cables. Mine didn’t have any ink bleed onto the product, and the chemical odor went away inside a pair days. You probably have someplace outdoors to let let it air out and lie flat for a day or so, we’d suggest doing that. It will assist with set up in addition to the odor.

Whereas the fabric is thick (which is an efficient factor), is of excellent high quality and does the job (after prepping it like others counsel), it isn’t for present. Like many others, our flooring wire protector got here with massive seen scuff marks on the highest. Not like others, we didn’t have any ink marks on high. Since we’re utilizing this in a basement/work room set up and is darkish brown, the scuff marks are acceptable for the job. The producer s video reveals that it comes with double-stick tape and it gives the look that the tape will maintain it flat. It received t. Even when the tape did maintain it flat, who would wish to put double-stick tape on a hardwood or vinyl flooring? and you probably have carpeting, no approach it could maintain. The thickness of the fabric is among the issues we like about it however additionally it is what offers it the unmanageable curl. We tried hanging it from the furnace room ceiling for a number of days. The curls didn’t budge. So, we did what others counsel. And also you observe/use these directions at your personal threat. As seen in picture 1, we uncurled it (mine is 15 toes) into a big sink. This was not straightforward because it doesn’t wish to uncurl. You may see within the decrease proper that the product is attempting to re-curl. Leaving the stopper out, we ran the recent water till it was as sizzling as it could get. We then turned off the water, put within the stopper after which ran the recent water till it lined the protector. We then boiled 3 quarts of water and punctiliously poured it into the sink. (in hindsight, we don t suppose we wanted so as to add the boiling water. ) we then let it sit for quarter-hour as a result of it’s worthwhile to let the warmth penetrate utterly by the thick materials. As you may see in picture 2, the curl in decrease proper is gone. We then used needle nosed pilers to place out the stopper. After the water drained, with gloved arms, we picked up one finish and slowly raised it in order that the water contained in the protector would drain out the opposite finish into the sink. As soon as out, we then laid it flat on flooring the place residual moisture wouldn’t injury the flooring. In our case, it was a concrete flooring. We then positioned a heavy weight on every finish (see picture 3) since it’s the ends the place it could wish to re-curl. We didn’t place any weights within the center. We left the weights on till the product completely cooled to room temperature. After we eliminated the weights, it was completely flat and we have been capable of set up, as seen in picture 4.

This merchandise works nicely for hiding a wire or two so your uncle bob will not journey on it. The one difficulty appears to be getting it to flatten out earlier than you need to use it. After shopping for the third certainly one of these now we have figured it out. Earlier than unrolling it put it in a bucket of actually sizzling water. Let it keep there for about 20 minutes. Lay it out in your driveway within the solar for an hour or so. Voila. It is flat and can keep that approach.

So proper off the bat we observed the identical issues as everybody else appears to have – it refuses to put flat, and the ink on the underside transfers to the highest. In our case, we purchased the black one so coloration matching wasn’t a difficulty and the ink on high cannot be seen in order that’s not a difficulty both. As for not laying flat, that was a very simple repair. As others have talked about, all you want is some sizzling water. Fill a big pot with water and convey it to a boil. Take it off the warmth and drop the wire protector in. Give it a pair minutes, then seize some tongs and pull it out, perhaps shake some water out, and lay it flat. Give it a minute to chill, and downside solved. You could possibly in all probability obtain the identical consequence with a warmth gun, however we did not have one and the boiling water trick works completely. quarter-hour can prevent a complete lot of frustration of curling edges or attempting to return it. Now our energy wire is out of the way in which and now not a watch sore.

After studying all of the destructive critiques about ink bleeding by and the stuff not desirous to lie flat, we have been a bit involved. These of us have been ordered comparatively brief lengths and we thought it could be totally different with a 50-foot roll. It definitely was. Not the faintest trace of bleed by and it instantly laid flat even after spending a few hours on the entrance porch on a chilly day. The one destructive is than it has a bit greater crown than we needed however turns out that issues nonetheless roll over it okay. The area for wires to undergo is sq.-formed and pretty tight. You will get at most 4 ethernet patch cables to suit – which is sufficient for us.

We didn’t count on any brown plastic to match completely with brown wooden. With that it thoughts, it really works very nicely with darkish hardwood flooring. Execs: we have been capable of cowl a really thick surge protector wire (14 awg). Though it isn’t as lovely as our wooden flooring, it’s infinitely better than the white energy wire working alongside our baseboards. It’s heavy, so it lays flat. It’s journey-proof. It’s straightforward to wash it’s the most suitable choice out there to cowl wires that run alongside you flooring it’s comparatively cheap for one thing that can final without end (at the moment $24 for 15′) it cuts simply with a pair of scissors to make smaller lengths. Cons: it’s low-cost plastic (however you knew that) it seems to be low-cost plastic (however you knew that). It would in all probability not match any pure materials, equivalent to wooden, stone, tile, and many others. (however you knew that) it’s uncomfortable to step on whereas barefoot, as a result of it’s convex. It is not too dangerous whereas sporting footwear. We appreciated it a lot that we bought a second cowl within the 50′ size. We are going to run it behind our sofa and canopy lamp cords, an ethernet cable and speaker wires.

Cons: not utterly flatpros: straightforward to put out, straightforward to get the cable installedwe have a cat6 cable that has to run throughout our front room, and it was making a spot for us to journey and in addition blocking our robotic vacuum. The product comes rolled up, and that is the most important problem we had which is getting it to put flat on carpet. We’d be capable to use the adhesive strips which are included, however we actually don’t desire tape something to our carpet. We laid the strip down in our storage and put some weights on high of it, then let it sit in there for a few days because it will get actually sizzling right here. It obtained it about 80% flat however the ends nonetheless had some rolling. We ended up taking a warmth gun to the ends and used weights once more. We have now it about 90-95% we’d say, however you may see within the image on the left aspect that it is nonetheless developing only a contact. It is flat sufficient now that our robotic vacuum can go over it and now we have no points with tripping. You may’t actually inform within the photos, nevertheless it has form of a spike within the center. We want it more if the highest was flat as an alternative of being a triangle. It is doing the job nicely, we simply have a few issues we’d change to make it 5 stars. General, we’d suggest this strip to cowl a cable.

Everybody says it is a ache to put in. They’re proper. You must correctly put together for the set up, identical to with many different issues. We said by unrolling the strip, and bending and flexing it for about 10 minutes, to attempt to straighten it out. We then positioned it on a flat floor outdoors, inserting {a magazine} on one finish, and setting a cinder block on the journal. We pulled it tight, and did the identical factor on the opposite finish. We left it like this all day within the solar. In the meantime, we prepped the wooden flooring the place we have been putting in the strip, through the use of 91% isopropyl alcohol and a clear cotton rag. That night, earlier than it was too late, we took the strip, which was flat and versatile, measured our cuts, and minimize the strip. We then shortly prepped the underside of the strip like we did the ground, utilized the adhesive, inserted the cables,after which affixed to the ground. We then used a hair dryer to warmth up the strip, and walked alongside the sides. It is good to go, it isn’t lifting or curling, and blends fairly nicely with our wooden flooring. Sure, it took time to prep, and to put in. Nonetheless, because it was completed proper, there are not any points.

We purchased this for protecting house theater speaker wire. We’re working 16 gauge wire by it and it’ll snugly match to strands of wire. When you re planning to make use of more then two strands of 16 gauge wire or bigger you may wish to look elsewhere. Nonetheless it was pretty straightforward to route the wire into the protector. It additionally comes with double aspect adhesive tape we use to stay to our wooden floors. To this point it has not held up very nicely. Nevertheless it s not an enormous difficulty for us so long as you keep away from strolling on it. We may have additionally completed a better job making ready the floor for the adhesive tape. Nevertheless it s not an enormous concern of mine as this was laid in low visitors areas of our front room.

Acquired these for the ethernet cords in the home till we are able to run wires within the wall. We initially had lined the cords with small space rugs however after we purchased a robotic vacuum it was having a tough time going over the rugs, getting caught, or pushing the rugs round. Acquired these and it was the right resolution. It comes rolled up in a field and you chop to the scale you want. The vacuum goes over the wire covers very simply. Solely destructive now we have is the double sided tape would not work the best on the ends the place we minimize it. It caught to the ground nice, nevertheless it didn’t wish to persist with the precise wire cowl. We expect the rationale it didn’t stick was as a result of the ends needed to roll again into the unique roll it is available in. We ended up placing e6000 on the aspect of the tape that sticks to the wire cowl and positioned a weight on it in a single day. Fastened the issue. We do have some left and if we want it we’re going to strive put weights on the ends to attempt to flatten it out earlier than placing the double sided tape down.

The robotic vac doesn’t rolls over the wire cowl. Not an issue for us. We ordered this from the warehouse for $1 much less and it was like new. We expect directions have been lacking. Not an issue. We laid the product flat within the heat storage with a protracted board on high and some weights for 24hrs to lower the roll up stress. It nonetheless had a really slight roll up at one finish. The two sided tape is useful for flat sections. We minimize the wire cowl in 2 and found fastidiously utilizing a razor blade works finest. It seems to be a lot better than the aluminum wire cowl we had in place.

We ordered the 5 ft “gray” one. Our carpet is a grayish-beige and the colour got here very shut as it’s more towards the sunshine brown spectrum than a real grey. Once you first take this factor out of the field, it is going to be rolled up in a loop. Laying it flat instantly will consequence within the far ends curling inwards towards the ground and twisting considerably. We used our relative’s hair dryer to heat up the fabric and bend it in the wrong way for about 10 minutes, on each ends, and this allowed it to put utterly flat with no points. We’re utilizing it to run “slim run” cat 6a cabling throughout the ground and it really works excellent for that goal. The fabric is heavy obligation. For the value, you may’t beat it. If it ever wears out to the purpose of turning into an eyesore, we are going to simply buy one other.

We have now used the sort of wire cowl earlier than; so this was an apparent resolution after we moved out couch and finish tables to the center of a room. This required us to run lamp cords over the open hardwood flooring. The wire cowl protects the cords from abrasion and reduces the probability of a visit hazard. The tan coloration additionally went nicely with the stain on our hardwood flooring. The one destructive is that the product comes rolled up fairly tightly and resists flattening. We rolled it out and left it for a number of days which helped, however the final foot or so by no means did flatten.

Purchased this to cowl an ethernet cable and in one other place an influence wire. It really works nicely for each. Positively sturdy and appears good. We bought the brown coloration, and it runs throughout hardwood flooring. We gave it a 5 as a result of, we’d buy it once more. Two issues that helped us out have been different posts. It comes curled, and it helped enormously to place it in a sink with sizzling water after which add a pan or two of boiling water. That permits it to increase and eliminate the curve. Then we dried it on the deck and laid it out on concrete. As soon as it dried, we minimize it and positioned the items the place we needed and no curl. Second factor is, there may be manufacture labeling on the underside aspect. We used the adhesive tape that was included and made positive that the tape was over the labeling simply in case it tried to switch to the ground.

We stay in a small house with no washer or dryer so we preserve 2 small haier items plugged into our kitchen, with the wires working throughout our hallway. For a very long time, we simply lined the wires with a rug, however now that now we have cats who like to tangle themselves up in rugs and generally pee on then, it was time to make an improve. The wire protector did arrive rolled up tight and onerous to flatten, however we simply rolled it in the wrong way and put some weight on it for a few minutes, and it flattened out simply high-quality. If it had caught, we’d have simply doused it in sizzling water or used a hair dryer to calm down the rubber. We trimmed ours into 2 items and managed to suit 2 cords into every half, which completely solved our wire downside. We did not use any adhesive as a result of we want to have the ability to sweep below that space, however have not had any points with it transferring or sliding. General, strong product. Want it was just a little cheaper, however no matter.

We used this to run a thick bnc cable throughout our workplace flooring. The colour is more on the taupe/brown spectrum which is strictly what we needed. Seems to be nice in opposition to brown/grey flooring. Set up notes: chopping your cable strip forward of time will make set up simpler. Makes positive your floor is totally clear and dry. Use an alcohol pad on the backing of the cable strip earlier than making use of the adhesive strip. We utilized our adhesive in sections to make sure a superbly straight line. Remember to press down firmly alongside the strip as soon as adhered to the ground to make sure full adhesion. Ultimate notes: this product has a robust rubber/vinyl odor at first. It would put on off after a few weak. It’s possible you’ll expertise some tough curling. You may bend this backwards fairly a bit to regulate it and as soon as utilized to the ground it’s going to finally flatten out. You probably have time an area, we’d counsel rolling it out and placing gentle weights on the tip to let it flatten for a day earlier than making use of.

Though this cable protector does what it’s designed to do the truth that it comes packaged in a coil makes putting in it considerably oi a problem. There actually is not any different solution to package deal this product however the motive we ordered it was to guard energy cables working below our furnishings in our front room. We have now hardwood flooring so we didn’t use the provided two confronted tape to carry it in place. Residing in florida, we took the product outdoors on our driveway in the course of the day within the sizzling solar and rolled it out flat. After about 2 hours the product was flat sufficient to make use of for our utility. Good product and offers very ample safety for energy cords.

It is available in a tightly curled roll. Match to measurement. We did not give ample time for tight curl to calm down so our tape did not adhere near the wall the place it was the tightest curl. This was totally our fault as a result of the remainder of the strip lays flat. It make the transition between a room and hallway walkway. We have now a speaker wire and speaker on the opposing wall. This ridge works nicely, nobody has tripped but. Not even two working kittens. Or a husband that scuffles his toes. We might positively suggest this and we might buy once more.

0/5 (0 Reviews)

Last update on 2020-11-26 / Affiliate links / Images from Amazon Product Advertising API

Leave a Reply

Your email address will not be published. Required fields are marked *

4 × four =